COMFORT AT THE RIGHT OUTPUT
Calculate your radiator's
output.
Which radiator for your home?
Enter your room details and discover suitable models.
02 / YOUR RADLINE SELECTION
An initial guide to help you choose.
Estimated output = volume × heating coefficient. Indicative ratios range from 30 to 60 W/m³ depending on climate and insulation, for typical residential heating. They do not constitute a heat loss calculation for a specific city or building.
The final choice also depends on glazing, exposed walls, ventilation and the desired temperature. Have your installer confirm sizing and unit placement.
View assumptions and sources
| Climate / insulation | Good | Average | Poor |
|---|---|---|---|
| Mild | 30 | 35 | 40 |
| Temperate | 35 | 40 | 50 |
| Cold | 40 | 50 | 60 |
Ratios in W/m³: ENGIE guide. Guideline of 40 W/m³: Thermor. References, outputs and dimensions: approved RADLINE BEMCO Morocco datasheet. The volumes are not capacities guaranteed by BEMCO.
Area, volume and heating output
Calculating radiator output, electric heating for each room or choosing a radiator by m²: these searches start from the same need. The RADLINE selector lets you enter the volume, or the area and ceiling height, then the insulation and climate to estimate a heating output.
Horizontal or vertical radiator: the Morocco RADLINE selection
The tool suggests RADLINE product codes from the Morocco selection, in horizontal or vertical format. If several radiators are needed, the result indicates this. You get an initial selection to discuss with your distributor, with access to the technical data sheet and a printable result.
Practical answers to your questions
How many watts are needed for a bedroom or living room?
Area alone does not describe the requirement. Height, insulation and climate influence the output. Enter the room details in the tool to get an explained estimate.
Can I calculate several rooms?
Make a selection for each room: their volumes and requirements may differ. The result remains an estimate to be confirmed for your home.
Discover BEMCO solutions for your installation
A free online tool with no account required. Ressi helps you confirm your project in Morocco.